The Mini Audio Lab is the useful measure tool for many situations in stage applications and a "must" for every live sound engineer. Some different test - and measure functions, are implemented:
- Touch display for a fast access to all measurement functions.
- Feedback frequency indentification.
- High precision Sine wave generator, with 30 selectable ISO frequencies plus 440 Hz
- Electret microphone with level response > 65dB at the lcd
- 6,3mm input connector for external signals (i.e. headphone out of monitor desk for feedback identification)
- Impedance measurement of speaker systems between 1 and 25 Ohm at different frequencies.
- Build in 1 Watt amp, NL4 Speakon socket, switcheable between Pin 1+/1- and 2+/2- for multiway systems
- Delay and Polarity measurement from 8 m up to 120 m, display in Meter and ms.
- Pink Noise generator.
- Burst signal generator for reverb or delay measurements.
- Inline test function via xlr male and female for listening of an analog signal via headphone. However, this allow to use the device as 1 chanel In Ear monitor system. The status of the phantom power is indicated on the lcd as well.
- A Voltmeter function for batteries and a cable check function with automatic switch over between Voltage check and cable test is implemented.
- Every menue option have it´s own help function what reduces the need to search for a paper manual and saves time when neccessary.
