Cable Lug to Powerline Conversion

Cable Lug to Powerline Conversion is designed for power cables that are already terminated with M12 cable lugs. It allows an existing cable to be converted to a Powerline connection without replacing the cable lug. The lug is bolted to the Powerline contact, after which the contact and cable are locked into the insulating cable housing.

Versions are available for Source and Drain connections and can be used with copper and Bi-metal cable lugs. Depending on the version, cable sizes from 35mm2 to 300mm2, cable diameters from 19mm to 37mm and cable lug palms up to 37mm wide can be accommodated.

• For existing cables fitted with M12 cable lugs
• Cable sizes from 35mm2 to 300mm2
• Suitable for copper and Bi-metal cable lugs
• Source and Drain versions
• IP2X finger protected when unmated
• IP68 sealing with the appropriate cable gland
• Cable diameters from 19mm to 45mm, depending on version
• Cable lug palm width up to 37mm
• Contact and cable lug can be removed from the housing with the appropriate removal tool